You are here: Get Started > Pairing Sensors with M460 > Polar Cadence Sensor Bluetooth® Smart

Polar Cadence Sensor Bluetooth® Smart

The most practical way of measuring your cycling session is with our advanced wireless cadence sensor. It measures your real-time, average and maximum cycling cadence as revolutions per minute so you can compare the technique of your ride against previous rides.

  • Improves your cycling technique and identifies your optimal cadence
  • Interference-free cadence data lets you evaluate your individual performance
  • Designed to be aerodynamic and light

Pair Cadence Sensor with M460

Make sure the cadence sensor has been correctly installed. For more information on installing the cadence sensor refer to the user manual of the cadence sensor.

There are two ways to pair a cadence sensor with your M460:

  1. Go to General Settings > Pair and sync > Pair other device and press START.
  2. M460 starts searching for the cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light on the sensor indicates that the sensor is activated.
  3. Once the cadence sensor is found, Polar CAD xxxxxxxx is displayed.
  4. Press START, Pairing is displayed.
  5. Pairing completed is displayed when the pairing is ready.
  6. Sensor linked to: is displayed. Choose Bike 1, Bike 2 or Bike 3. Confirm with START.

    The first cycling sensor you pair will automatically be linked to Bike 1.

or

  1. Press START in time view to enter pre-training mode.
  2. M460 starts searching for your cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light on the sensor indicates that the sensor is activated.
  3. The device ID Pair Polar CAD xxxxxxxx is displayed. Choose Yes.
  4. Pairing completed is displayed when the pairing is ready.
  5. Sensor linked to: is displayed. Choose Bike 1, Bike 2 or Bike 3. Confirm with START.