You are here: Get Started > Pairing Mobile Device with M460

Pair a Mobile Device with M460

Before pairing a mobile device, create a Polar account if you do not already have one, and download Flow app from the App Store or Google Play. Make sure you have also downloaded and installed FlowSync software onto your computer from flow.polar.com/start, and registered your M460 in the Flow web service.

Before trying to pair, make sure your mobile device has Bluetooth turned on, and airplane mode/flight mode is not turned on.

To pair a mobile device:

  1. In M460, go to Settings > General settings > Pair and sync > Pair and sync mobile device and press START.
  2. Once your device is found, the device ID Polar mobile xxxxxxxx is displayed on M460.
  3. Press START, Connecting to device is displayed, followed by Connecting to app.
  4. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your M460.
  5. Pairing completed is displayed when you are done.

or

  1. On your mobile device, open Flow app and sign in with your Polar account.
  2. Wait for the Connect product view to appear on your mobile device (Searching for Polar M460) is displayed.
  3. In M460 time mode, press and hold BACK.
  4. Connecting to device is displayed, followed by Connecting to app.
  5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your M460.
  6. Pairing completed is displayed when you are done.

Delete a Pairing

To delete a pairing with a sensor or mobile device:

  1. Go to Settings > General settings > Pair and sync > Paired devices and press START.
  2. Choose the device you want to remove from the list and press START.
  3. Delete pairing? is displayed, choose Yes and press START.
  4. Pairing deleted is displayed when you are done.