Which third-party power sensors are compatible with Grit X/Pacer/Vantage?
Applies to: Grit X Grit X Pro Pacer Pacer Pro Vantage M Vantage M2 Vantage V Vantage V2 Vantage V3 Grit X2 Pro Vantage M3 Grit X2
In addition to a number of Polar sensors your watch is compatible with several third-party sensors. This document lists the third-party cycling sensors that can be used with Grit X/Vantage, as well as the supported metrics for each sensor.
- The metrics marked with (X) are supported by Grit X/Pacer/Vantage.
- The metrics marked with (-) are not supported by Grit X/Pacer/Vantage.
- The metrics marked with (est.) are provided with an estimated value.
- The metrics marked with (opt) are optional estimations provided by the sensor, supported by Grit X/Pacer/Vantage.
- The metrics marked with a blank space are not available in the sensor.
We have tested the compatibility of Grit X/Pacer/Vantage with third-party power sensors in close co-operation with the sensor manufacturers.
Please make sure that you use the latest firmware both in your Grit X/Pacer/Vantage and in the third-party power sensor.
| Power | X |
|---|---|
| Cadence | X |
| Speed | |
| Balance | (est.) |
| Vector | |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration | X |
| Power | X |
|---|---|
| Cadence | X |
| Speed | X |
| Balance | |
| Vector | |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration | X |
Bluetooth only and Dual models are supported, ANT+ only model is not supported.
| Power | X |
|---|---|
| Cadence | X |
| Speed | |
| Balance | X |
| Vector | - |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration | * |
Known issues:
* Calibration doesn’t work.
| Power | X |
|---|---|
| Cadence | X |
| Speed | |
| Balance | |
| Vector | |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration | * |
Known issues:
* Calibration doesn’t work.
| Power | X |
|---|---|
| Cadence | X* |
| Speed | |
| Balance | |
| Vector | |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration | X |
Known issues:
* Some cadence drops
| 4iii PRECISION (left-side) | |
|---|---|
| Power | X |
| Cadence | X |
| Speed | |
| Balance | |
| Vector | |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration | X |
| Rotor 2INpower | |
|---|---|
| Power | X |
| Cadence | X |
| Speed | |
| Balance | X |
| Vector | - |
| Min/Max Force | - |
| Dead Spots Angles | - |
| Offset Calibration | X |
| Quarq DZero | |
|---|---|
| Power | X |
| Cadence | X |
| Speed | |
| Balance | (est.) |
| Vector | - |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration | X |
| Power | X |
|---|---|
| Cadence | X |
| Speed | |
| Balance | (est.) |
| Vector | |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration | X |
| Favero Assioma | |
|---|---|
| Power | X |
| Cadence | X |
| Speed | |
| Balance | X |
| Vector | |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration | X* |
* Before doing the calibration, pedal a few rotations after your Polar device has found the sensor signal.
For best performance with Favero Assioma do the following:
- Connect both Assioma sensors to the Favero Assioma app.
- Set them from "unified channel" to "double channel mode".
- Connect both sensors to your Polar watch and pair them to the same bike profile (Bike 1 for example).
| Power | X |
|---|---|
| Cadence | X |
| Speed | X |
| Balance | |
| Vector | |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration |
Tested only with Vantage V2. Wattbike Atom tested with: Firmware version: 1.02.01.
| Power | X |
|---|---|
| Cadence | X |
| Speed | X |
| Balance | |
| Vector | |
| Min/Max Force | |
| Dead Spots Angles | |
| Offset Calibration |
Only data reception is possible, controlling sensor not possible. Tested only with Vantage V2 and Vantage M2. Wahoo KICKR tested with: Firmware version: 3.4.71.
Shop maintenance
Sorry, our shop is currently down for planned maintenance. To track the progress of the break, head over to https://status.polar.com/
Success! ##























