Menu

Which third-party power sensors are compatible with Polar Grit X/Vantage M/Vantage V/Vantage V2?

The compatibility table below shows which third-party power sensors can be used with the Polar Grit X/Vantage M/Vantage V/Vantage V2, and which of their metrics are supported.

  • The metrics marked with (X) are supported by Grit X/Vantage M/Vantage V/Vantage V2.
  • The metrics marked with (-) are not supported by Grit X/Vantage M/Vantage V/Vantage V2.
  • The metrics marked with (est.) are provided with an estimated value.
  • The metrics marked with (opt) are optional estimations provided by the sensor, supported by Grit X/Vantage M/Vantage V/Vantage V2.
  • The metrics marked with a blank space are not available in the sensor.

We have tested the compatibility of Grit X/Vantage M/Vantage V/Vantage V2 with third-party power sensors in close co-operation with the sensor manufacturers.

Please make sure that you use the latest firmware both in your Grit X/Vantage M/Vantage V/Vantage V2 and in the third-party power sensor.

Sensor Power Cadence Speed Balance Vector Min/Max Force Dead Spots Angles Offset Calibration
Powertap C1 X X   (est.)       X
Powertap G3* X X X         X
Powertap P1 X X   X -     ***
Powertap P1S X X           ***
Stages cycling (single-side) X X****           X
4iii PRECISION (left-side) X X           X
Rotor 2INpower X X   X - - - X
Quarq DZero X X   (est.) -     X
Power2Max NG X X   (est.)       X
Polar LOOK Kéo Power X X   X - - - X
Favero Assioma X X   X       X**
Wattbike Atom***** X X X          
Wahoo KICKR***** X X X          

 

* PowertapG3: Bluetooth only and Dual models are supported, ANT+ only model is not supported.

**Favero Assioma: Before doing the calibration, pedal a few rotations after your Polar device has found the sensor signal.

*****Wahoo KICKR: only data reception is possible, controlling sensor not possible.

*****Wattbike Atom and Wahoo KICKR tested only with Vantage V2.

Wattbike Atom tested with: Firmware version: 1.02.01. Wahoo KICKR tested with: Firmware version: 3.4.71.

Known issues:

***Powertap P1/Powertap P1S: Calibration doesn’t work

****Stages: Some cadence drops

 

Contact Us
Contact Us
Request repair
Request repair

Change region

If your country is not listed on this page, please find your local contact details, retailers and stores and service points on our global site.