How do I pair a Bluetooth smart sensor with my M200?
Your M200 supports Polar heart rate sensors with a chest strap, such as the H7, and the Polar Balance scale.
To pair a Polar heart rate sensor with your M200, do the following:
- Wear the moistened heart rate sensor as instructed in the heart rate sensor user manual.
- On the M200, go to Settings > Pair & sync > Pair & sync devices, and press and hold the RIGHT button.
- Touch the heart rate sensor with your M200.
- Pairing is shown during pairing and Completed is shown after the pairing is done.
Note that when you're wearing a Polar Bluetooth Smart heart rate sensor that's paired with your M200, the M200 does not measure your heart rate from the wrist.
To pair a Polar Balance scale with your M200, do the following:
- On the M200, go to Settings > Pair & sync > Pair & sync devices, and press and hold the RIGHT button.
- M200 starts searching for your scale. Searching is displayed on the M200.
- Step on the scale. The scale display shows your weight.
- After a beep sound, the Bluetooth icon on the scale display starts flashing, meaning that the connection is now on.
- Pairing is shown on the M200 during pairing, and Completed is shown after the pairing is done.
If your heart rate sensor or scale won’t pair with your M200, you can try the following tips:
You can try restarting the heart rate sensor or the weight scale. To restart the heart rate sensor, remove the heart rate sensor from the strap. Wait 30 seconds, and place the sensor back. Restarting (and resetting) the scale is done by removing the batteries from the scale, and putting them back in.
You can try if changing the battery from the device you want to pair with your M200 will fix the pairing issue. See a [video tutorial on how to change the H7 battery].
Reset the sensor by taking the battery out for 6 minutes. You need to touch both of the snap connectors for 10 seconds right after you have taken the battery out.