將行動裝置與手錶配對

在將行動裝置與手錶配對前,需要按照設定手錶一章中的說明,在 Polar Flow 網絡服務或使用 Polar Flow 行動應用程式,來設定手錶。如果您使用行動裝置對手錶完成了此設定,說明您的手錶已配對。如果您利用電腦進行了設定,並且希望將手錶與 Polar Flow app 一起使用,請按照以下說明來配對手錶與行動裝置:

在配對行動裝置前

  • 從 App Store 或 Google Play 上下載 Polar Flow app。
  • 確保您的行動裝置已開啟藍芽功能,並且未開啟飛航模式。
  • Android 使用者:確保在手機的應用程式設定中為 Polar Flow app 啟用定位。

若要配對行動裝置:

  1. 在行動裝置上,打開 Polar Flow app 並使用您的 Polar 賬號登入,此賬戶是您在設定手錶時創建的。

    Android 使用者:如果您有使用數個與 Polar Flow 應用程式相容的 Polar 裝置,請確保您已將 Vantage V2 選為 Polar Flow 應用程式中的啟用裝置。這樣,Polar Flow 應用程式就會知道連接至您的手錶。在 Polar Flow 應用程式中,前往 Devices(裝置),並選擇 Vantage V2。

  2. 在手錶上,在時間模式中長按 BACK(返回),進入 Settings > General settings > Pair and sync > Pair and sync phone(設定 > 一般設定 > 配對和同步 > 配對和同步手機),並按 OK(確定)。
  3. 手錶上顯示 Open Flow app and bring your watch close to phone(打開 Polar Flow app,並將手錶靠近手機)。
  4. 當行動裝置上顯示 Bluetooth Pairing Request(藍芽配對請求)確認訊息時,檢查並確認行動裝置上顯示的代碼與手錶上顯示的代碼相匹配。
  5. 在行動裝置上接受藍芽配對請求。
  6. 按 OK(確定),確認手錶上的 pin 碼。
  7. 配對完成後,顯示 Pairing done(配對完成)。

刪除配對

若要刪除與行動裝置的配對:

  1. 前往 Settings > General settings > Pair and sync > Paired devices(設定 > 一般設定 > 配對和同步 > 已配對裝置),並按 OK(確定)。
  2. 從清單上選擇您希望移除的裝置,然後按下 OK(確定)。
  3. 螢幕會顯示 Remove pairing?(移除配對?)。按下 OK(確定)以確認。
  4. 完成時,螢幕會顯示 Pairing removed(配對已移除)。