Menu

如何将 Grit X/Pacer/Vantage 与 Polar Flow 应用程式配对?

如果从手表进行设置,您的手表尚未与 Polar Flow 连接。您需要在 Polar Flow 网络服务中或使用 Polar Flow 移动应用程式来设置手表,才能将移动设备与手表配对。如需说明,请参阅 我如何开始使用 Grit X/Vantage?

如果您使用移动设备对手表完成这一设置,则手表已配对。如果您利用电脑进行了设置,并且希望将手表与 Polar Flow 应用程式一起使用,请按照以下说明来配对手表与移动设备:

在要配对移动设备前:

  • 从 App Store 或 Google Play 上下载 Flow 应用程式。
  • 确保您的移动设备已开启蓝牙功能,并且未开启飞行模式。
  • Android 用户: 确保在手机的应用程序设置中为 Polar Flow 应用程序启用定位。

若要配对移动设备:

  1. 在移动设备上,打开 Flow 应用程式并使用您的 Polar 账户登录,此账户是您在设置手表时创建的。

    Android 用户:如果您在使用兼容 Flow 应用程式的多个 Polar 设备,请确保您已将 Grit X/Grit X Pro/Pacer/Pacer Pro/Vantage M/Vantage M2/Vantage V/Vantage V2 选为 Flow 应用程式中启用的设备。这样,Flow 应用程式知道需连接至手表。在 Flow 应用程式中,进入 Devices (设备),并选择 Grit X/Grit X Pro/Pacer/Pacer Pro/Vantage M/Vantage M2/Vantage V/Vantage V2。

  2. 在手表上,在时间模式下长按“BACK(返回)”, 前往 Settings > General settings > Pair and sync > Pair and sync phone (设置>一般设置>配对和同步>配对和同步手机),并按下确定。
  3. 手表上显示 Open Flow app and bring your watch close to phone (打开 Flow 应用程序,并将手表靠近手机)。
  4. 在您的移动设备上显示 Bluetooth Pairing Request (蓝牙配对请求)确认消息时,检查和确认移动设备上的代码与手表上显示的代码相匹配。
  5. 在移动设备上接受 Bluetooth 配对请求。
  6. 按下“OK(确定)”,确认手表上的 pin 代码。
  7. 配对完成后,显示Pairing done (配对完成)。

Contact Us
联络我们
Request repair
要求维修

Change region

If your country is not listed on this page, please find your local contact details, retailers and stores and service points on our global site.