Menu

Troubleshooting Cadence Sensor Bluetooth® Smart

Have you paired your cadence sensor with V800?

There are two ways to pair a cadence sensor with your V800:

  1. Press START in time view to enter pre-training mode.
  2. V800 starts searching for your cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light in the sensor indicates that the sensor is activated.
  3. The device ID Pair Polar CAD xxxxxxxx is displayed. Choose Yes.
  4. Pairing completed is displayed when the pairing is complete.
  5. Sensor linked to: is displayed. Choose Bike 1 or Bike 2. Confirm with START.

 

Or

  1. Go to General Settings > Pair and sync > Pair new device and press START.
  2. V800 starts searching for the cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light in the sensor indicates that the sensor is activated.
  3. Once the cadence sensor is found, Polar CAD xxxxxxxx is displayed.
  4. Press START, Pairing is displayed.
  5. Pairing completed is displayed when the pairing is complete.
  6. Sensor linked to: is displayed. Choose Bike 1 or Bike 2. Confirm with START.

 

Does the light flash in the sensor when the cadence magnet passes it?

The light indicates that the cadence sensor is positioned correctly and that the sensor is alive. For more on positioning, see the cadence sensor user manual or installation video.

For more support, see

Contact Us
Contact Us
Request repair
Request repair

Change region

If your country is not listed on this page, please find your local contact details, retailers and stores and service points on our global site.