Menu

Troubleshooting M400 Sensors

Troubleshooting Heart Rate Sensor

Have you paired your heart rate sensor with M400?

There are two ways to pair a heart rate sensor with your M400:

  1. Wear your heart rate sensor, and press START in time view to enter pre-training mode.
  2. To pair, touch your sensor with M400 is displayed, touch your heart rate sensor with M400, and wait for it to be found.
  3. The device ID Pair Polar H7 xxxxxxxx is displayed. Choose Yes.
  4. Pairing completed is shown when you are done.

Or

  1. Go to General Settings > Pair and sync > Pair new device and press START.
  2. M400 starts searching for your heart rate sensor.
  3. Once the heart rate sensor is found, the device ID Polar H7 xxxxxxxx is displayed.
  4. Press START, Pairing is displayed.
  5. Pairing completed is displayed when you are done.

Are you wearing the heart rate sensor correctly?

For more information, see How to wear a heart rate sensor with textile strap.

Is the heart rate sensor and the strap clean?

For more information, see Using and caring for Polar Soft strap.

Did the heart rate sensor you are using come in the M400 set?

If yes, check that you've paired the sensor with the training computer.

If not, check that the sensor is compatible with your training computer. For more information, see What sensors and accessories is my Polar training computer compatible with?

Are the heart rate signals unusually high or otherwise abnormal?

Relocating the training computer or adjusting the heart rate sensor on your body may help. Possible sources of disturbance are listed  here.

Could the heart rate sensor battery be getting empty?

The battery lifetime of Polar H7 is about 200 hours.

Check the battery changing instructions here.

Have you paired your Polar H7 with another device or application?

If pairing your Polar H7 with your Polar M400 does not work, try if removing the pairing between your Polar H7 and the other device or application helps.

Troubleshooting Stride Sensor Bluetooth® Smart

Have you paired your stride sensor with M400?

There are two ways to pair a stride sensor with your M400:

  1. Press START in time view to enter pre-training mode.
  2. Touch your stride sensor with M400, and wait for it to be found.
  3. The device ID Pair Polar RUN xxxxxxxx is displayed. Choose Yes.
  4. Pairing completed is shown when you are done.

Or

  1. Go to General Settings > Pair and sync > Pair new device and press START.
  2. M400 starts searching for your stride sensor.
  3. Once the stride sensor is found, Polar RUN xxxxxxxx is displayed.
  4. Press START, Pairing is displayed.
  5. Pairing completed is displayed when you are done.

Is the sensor correctly attached in your shoelaces?

For more infomation, see Using Polar Stride Sensor Bluetooth Smart.

Contact Us
Contact Us
Request repair
Request repair

Change region

If your country is not listed on this page, please find your local contact details, retailers and stores and service points on our global site.