Menu

Pairing Kéo Power Essential Bluetooth® Smart Transmitter with Cycling Computers

Pair the transmitter with the receiving device before going for your first ride.

You can find a device ID printed on the backside of the transmitter.

  1. Rotate the cranks for five complete revolutions to wake up the transmitter.
  2. Continue the pairing process on the cycling computer.

If, for some reason, the pairing fails:

  • Check the transmitter battery. Replace the battery, if it is empty. 
  • Check the receiving Polar device battery. Recharge the battery, if necessary.
  • Check that the receiving Polar device is close enough to the transmitter.
  • Check that the transmitter is awake.

On V800

There are two ways to pair the Kéo Power Essential Bluetooth® Smart transmitter with your V800:

  1. Press START in time view to enter pre-training mode.
  2. Rotate the cranks to wake up the transmitter.
  3. The device ID Pair Polar PWR xxxxxxxx is displayed. Choose Yes.
  4. Pairing completed is shown when you are done.

or

  1. Go to General Settings > Pair and sync > Pair new device and press START.
  2. Rotate the cranks to wake up the transmitter. V800 starts searching for a Kéo Power Essential Bluetooth® Smart transmitter.
  3. Once the transmitter is found, Polar PWR xxxxxxxx is displayed.
  4. Press START, Pairing is displayed.
  5. Pairing completed is shown when you are done.

Contact Us
Contact Us
Request repair
Request repair

Change region

If your country is not listed on this page, please find your local contact details, retailers and stores and service points on our global site.