Menu

Kéo Power Essential Bluetooth® Smart Maintenance

Here you can find answers to some frequently asked questions on Kéo Power Essential Bluetooth® Smart maintenance.

Checking the Pedal Tightness

To ensure best measurement accuracy, check the pedal tightness on your Kéo Power Essential Bluetooth® Smart system approximately once every 500 km / 310 mi. If the pedal seems to have loosened up, tighten the pedal.

Before you start to tighten the pedal, have a spare cable tie ready, as you will probably have to cut the cable tie already in place.

To check the pedal tightness:

  1. Remove the transmitter.
  2. Place the pedal installation tool into the pedal axle so that its shaft is in line with the crank.
  3. Hold the tool in place and tighten the pedal locknut with an 18 mm wrench. The recommended tightening torque is 35 Nm / 25.8 lbf-ft.
  4. Re-install the transmitter.

Contact Us
Contact Us
Request repair
Request repair

Change region

If your country is not listed on this page, please find your local contact details, retailers and stores and service points on our global site.