Track back and Back to start

The track back and back to start navigational features both guide you back to the starting point of your session. Track back guides you back to your starting point via the same route you came whereas Back to start shows the direction to your starting point. Both features show the distance to the starting point of your session.

Track back can be set on after starting a session and can be used only after you've gone far enough from your starting point. Back to start can be set on before the session has been started in the pre-training mode. The display then shows the distance and direction to your starting point throughout your training session. Both features can be accessed from Settings when pausing your session.

Note that GPS must be set on for the sport profile to be able to use these features.

  1. Press BACK to pause your session, then open Settings.
  2. Choose Back to start, and choose Via same route.
  3. Follow the guidance on the display to the starting point of your session. On the display you'll see the distance to the starting point of your session via the route.

Functions during Track back

  • Press OK in the Track back view to access zoom mode. To zoom in or out, use the UP (+) and DOWN (–) buttons, or pinch the display with your fingers. Press BACK to exit zoom mode.
  • To open navigation options, press OK in zoom mode, or press OK twice in the Track back view.
  1. In the pre-training or pause mode, open Settings.
  2. Choose Back to start, and choose Via beeline.
  3. Guidance on the display shows the direction back to your starting point, your direction and the distance left.

Functions during Back to start

  • Press OK in the Back to start view to access zoom mode. To zoom in or out, use the UP (+) and DOWN (–) buttons, or pinch the display with your fingers. Press BACK to exit zoom mode.
  • To open navigation options, press OK in zoom mode, or press OK twice in the Back to start view.

To return to your starting point via beeline:

  • Keep your watch in a horizontal position in front of you.
  • Keep moving in order for your watch to determine which direction you are going. An arrow will point in the direction of your starting point.
  • To get back to the starting point, always turn in the direction of the arrow.
  • Your watch also shows the bearing and the direct distance (beeline) between you and the starting point.

When in unfamiliar surroundings, always keep a map at hand in case the watch loses the satellite signal or the battery runs out.