Wristband adapter

When using the wristband adapter Polar Pacer Pro is compatible with all standard 20 mm wristbands that have a spring bar.

Attach adapters to watch

1. Put the adapter into place, and then insert the pin into the pin hole on the adapter, and push it firmly into place. Make sure the knob on the pin is the right way around.
2. Make sure the pin is pushed all the way and you're all set.

Attach wristband to adapter

1. Insert the pin (the opposite side of the quick-release knob) into the pin hole on the adapter.
2. Pull the quick-release knob inwards and align the other end of the pin with the hole on the adapter.
3. Release the knob to lock the band in place.