Menu

Transmitter Lights and Sounds

Team2 Pro transmitter lights and sounds during training.

   

Light/Sound

Function

Green led is blinking at heart rate. Transmitter receives heart rate signal and is ready for recording.
Red led is blinking at heart rate. Transmitter receives heart rate signal and is ready for recording. Memory or battery level is low.
Start recording sound. Transmitter starts recording.
Green led is blinking every 3 seconds. Transmitter is recording heart rate data.
Stop recording sound. Transmitter stops recording.
Red led is double blinking every 5 seconds for 30 seconds.

Stop recording sound.

Recording cannot be started because the battery or memory level is low.
Red led is double blinking every 5 seconds for 10 minutes.
Stop recording sound.
Recording has been stopped because transmitter memory is full or the battery is empty.



Team2 Pro lights and sounds during charging.

   
Light/Sound Function
Red led is on for 5 seconds.
Short sound.
Transmitter is properly placed into the charger.
Red led is blinking every 5 seconds. Transmitter is charging.
Green led is blinking every 10 seconds. Transmitter's battery is full.
Green led is on. The user can activate the connection between a new transmitter and the system and activate the transmitter's number while introducing new transmitters to the system.
Red led is on for 5 seconds.
Three short sounds.
Transmitter is properly placed into the charger, but is in not-secured mode. Data cannot be transferred while the transmitter is in not-secured mode.

To be able to transfer data from the transmitter to the PC or to change transmitter's settings, change the mode to secured by removing the transmitter from charger and inserting it back after a minimum of 3 seconds. Only one sound should be heard.



Contact Us
Contact Us
Request repair
Request for Warranty Claim

Change region

If your country is not listed on this page, please find your local contact details, retailers and stores and service points on our global site.